矿用

聚氨酯碰头

让生命多一份保障 【 产品说明 】

聚氨酯碰头是一种矿区运输用的矿车用于防止碰撞的新型产品,是矿车生产单位和矿车维修单位的
配套产品。当发生相撞时,不仅能起缓冲防撞作用,而且能起隔离作用。

Polyurethane meet is a new type of mine car used for transportation to prevent collisions. It is a supporting product for mine car production units and mine car repair units. When a collision occurs, it not only acts as a buffer and anti-collision, but also acts as an isolation.

矿山配件·

聚氨酯碰头

聚氨酯矿车碰头主要用于矿车前端,防止矿车相
互碰撞,起缓冲作用。
使用碰头后,能有效的阻止矿车与矿车碰撞而产
生的火花,防止发生爆炸。

聚氨酯碰头

聚氨酯弹性体是一种介于橡胶和塑料之间的新型高分子合成材料,它既具有塑料的高强度又具有橡胶的高弹性。在橡胶硬度下它们的扯断强度和承载能力比通用橡胶 高得多。在高硬度下其冲击强度和弯曲强度的又比塑料高得多。

Polyurethane elastomer is a new type of polymer synthetic material between rubber and plastic. It has both high strength of plastic and high elasticity of rubber. Their tear strength and load carrying capacity are much higher than rubber for rubber. At high hardness, its impact strength and flexural strength are much higher than plastic.

矿车是煤矿及矿山施工的重要工具,然而矿车在使用过程中容易出现矿车与矿车之间碰撞产生噪音、电火花甚至车毁的现象,直接影响煤矿的安全及工作效率。

Mine car is an important tool for coal mine and mine construction. However, in the process of using the mine car, the collision between the mine car and the mine car is likely to cause noise, electric spark or even car damage, which directly affects the safety and working efficiency of the coal mine.

矿用

聚氨酯碰头

6大核心特点保驾护航 【 产品特点 】
聚氨酯碰头

1.抗压性强 具有良好的耐油性、韧性、耐磨性、耐老化性和粘合性

2.耐高低温 耐高低温,在零下20度~高温120度均可使用

3.防噪音好 该矿车碰头特点是噪音小,是金属碰头无法比拟的,更便于安全生产

矿山配件·

聚氨酯碰头

Professionally committed to the miners industry

我公司是矿建设备大型的生产企业,现有高级工程师16人,技术人员38人,技工150人,主要生产各种规格型号的矿车配件,矿车轮对,三环链,万能环,矿车插销,矿车碰头等产品,以及高技术含量先进的矿建产品和新产品的研发,所有产品均有国家颁发的许可证。根据市场经济发展的需要,公司先后与120多家大型生产矿建产品的厂家和多家煤科院以及知名矿业大学建立了密切的合作联营关系,为开发新产品,支援国家能源和矿业建设发展奠定了坚定的基础。

矿用

聚氨酯碰头

小细节 大用途 【 细节展示 】

聚氨酯碰头  

结构信息

聚氨酯碰头包含有碰体,碰体的两侧设置有卡槽,碰体的一端设有定位孔,碰体的中部设有上下贯通的插孔;碰体通过卡槽、定位孔安装在矿车的底架中,碰体的一端伸出底架,在碰体伸出底架的一端上设有防撞帽。

The polyurethane meets the touch body, and the two sides of the touch body are provided with a card slot, and one end of the touch body is provided with a positioning hole, and the middle portion of the touch body is provided with a jack that penetrates up and down; the touch body is installed in the mine car through the card slot and the positioning hole.

聚氨酯碰头
卡槽 定位孔 插孔 定位孔 卡槽

聚氨酯碰头  

使用标准

矿车聚氨酯碰头在矿石和废石等散状物料的窄轨铁路搬运车辆中,矿车碰头一般须用机车或绞车牵引。

A narrow-gauge railway handling vehicle in which the mine car meets loose materials such as ore and waste rock. The mine car meets normally with a locomotive or winch.

聚氨酯碰头

相关产品推荐